 |
 |
News  Product
New XB808 Alu Labyrinth Cover for Clutch Bell |
|
 |
| |
|
|
| XRAY presents new authentic option parts for XRAY XB808 car: |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Machined aluminum Labyrinth Cover fits all XRAY clutch bells to prevent dirt from entering the clutch assembly. Especially effective when used with V2 clutch bell due to its perfect fit. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
#355113 XB808 Pinion Gear 10T for 3 Bearings
• 3-bearing, 10-tooth bevel drive gear
• Fits front/rear differential
• Premium HUDY Spring Steel™
• Precision machined on a special gear machine
• Heat treated for maximum strength, durability, minimal wear, and extra-long lifespan
• Direct fit for XB808 2010-spec bulkhead, requires use of the special #352077 collars and #355690 composite seal |
|
(click to enlarge) |
|
|
|
| 3-bearing, 10-tooth bevel drive gear for XB808 front/rear differential. Manufactured from premium HUDY Spring Steel™, precision machined on a special gear machine and heat treated for maximum strength, durability, minimal wear, and extra-long lifespan. 3-bearing pinion gear is a direct fit into the XB808 2010-spec bulkhead, requiring use of the special #352077 collars and #355690 composite seal. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Alu collar provides even spacing between bearings within front/rear XB808 diff bulkhead blocks. With capturing screws tightened, both bearings are strengthened in the block so they can support more load thus improving bearing lifespan. Set of 2. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
#355081 Alu Diff. Pin - Hard Coated (2)
• Alu hardcoated pins for gear differential
• CNC-machined
• Premium lightweight Swiss 7075 T6 aluminum
• Hardcoated for extra durability and long life |
|
|
| Alu hardcoated pins for gear differential are CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Set of 2. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
#358832 Composite Air Filter Cover
• Molded composite air filter cover
• Protects air filter
• Recommended for muddy and rainy conditions
• Direct fit for 808 low-profile air filter assembly |
|
(click to enlarge) |
|
|
|
| Molded composite optional cover for air filter protects the filter and is recommended for muddy and rainy conditions. The cover is a direct fit for the 808 low-profile air filter assembly. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Set of composite molded 8- and 10-hole shock pistons for two shock absorbers. 8-hole pistons are available with 2 different-sized holes (1.2 and 1.3mm) for changing damping (2 per piston). 10-hole pistons are available with 1.1mm holes. These pistons are conical for smoother damping.
Big-bore pistons are manufactured from well-proven specially-formulated composite material to provide smoother action and durability. The well-proven molding production process is used to ensure perfect roundness of the pistons after production, so that the pistons will move perfectly inside the shock bodies for identical shock action in all four shocks. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
| Newly designed improved shock membranes provide more consistent feel during long finals with no sign of fade. Shock membrane for XB808 shocks, made of soft molded rubber. The new shock membranes are wider to fit the big-bore shocks. The material has been also improved to guarantee the same damping characteristics from the beginning of the race to the end even after excessive loads. Set of 4. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
Rear anti-roll bar for XB808, 3.0mm thick. Without any laser-engraved lines for easy identification.
Anti-roll bar wires of different thickness are optionally available for fine-tuning the setup of your XB808. XRAY anti-roll bars are manually manufactured in-house from premium heat-treated spring steel wire using precision bending machines that ensure equal side angles. Manually measured, selected, and straightened to eliminate all tweak. |
|
(click to enlarge) |
|
|
(click to enlarge) |
Adjustable left & right M5 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Precision threading for fine toe adjustment. Length of 58mm & 64mm. Set of 2. Fits XB808.
For serious racers who are conscious of weight savings, XRAY offers lightweight alu turnbuckles. Lighter by 50%. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
• Center Active Diff™ spur gears
• Made from Hudy Steel
• Individually machined & inspected
• Precision ground
• Manually run in
• Heat treated and hardened
• Extraordinarily-long lifespan |
|
|
New large bevel gear for center differential is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. The gears are individually machined on a precision German gear machine and every gear is individually tested, inspected, and run in. The diff gear is then laser engraved for easy and instant recognition.
Our special heat treatment makes the gear very hard and strong not only on the surface but also in the core, thus give the gear an extraordinarily-long lifespan with very low wear comparing to standard gears.
Available as 41T, 42T and 43T. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
#355071 Center Diff Outdrive Adapter - Lightweight - Hudy Steel (2)
• CNC-machined diff outdrive adapters
• Fits center diff
• HUDY Steel
• Lighter than standard adapters
• Reduced rotating weight
• Machined on precision German long-turn machines
• Additionally ground and strategically lightened
• Maximum strength
• Extra-long lifespan
• Precision hand-grinding
• Super-high tolerance
• Ultra-smooth tight fit in the diff body and diff gear |
|
(click to enlarge) |
|
|
|
| XRAY offers lightweight CNC-machined center diff outdrive adapters. Made from HUDY toughened steel, the outdrives have been strategically machined to be lighter than standard #355070 center diff outdrive adapters. For serious racers who are conscious of weight savings. |
|
|
| CNC-machined on precision German long-turn machines. Additionally ground and strategically lightened to reduce rotating weight, then further hardened to ensure maximum strength and extra-long lifespan. Final precision hand-grinding ensures a very high tolerance to ensure an ultra-smooth tight fit in the diff body and diff gear. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
#355103 XRAY XB808 Active Center Diff™
• Adjustable Active Center Differential™
• Improves speed & handling
• Increases steering
• Fits XB808 models
• Fully adjustable
• On- and off-power performance adjustment
• Exchangeable internal segments and gears
• Recommended for high-traction tracks
|
|
(click to enlarge) |
| The unique XRAY Active Center Differential™ is a high-performance, adjustable center gear differential for XB808 buggies, vastly improving the buggy’s speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction and stability of the buggy, making it faster and easier to drive. |
|
(click to enlarge) |
The Active Center Diffential™ was developed for improving steering for high traction off-road tracks, and must be used with the Front Active Differential™.
While the XRAY Active Center Differential™ is a performance option for serious racers who want to gain an edge on superior speed and handling, it is also of great benefit to any level of driver that wants to a more. agressive car with more turn in response. |
|
(click to enlarge) |
|
| Overview: |
|
| • High-performance adjustable Active Center Differential™ for improved speed & handling • Designed for XB808 models • Fully adjustable on- and off-power performance using different internal segments and gears • Increases steering • Recommended for high-traction tracks • To be used with Front Active Differential™ |
| On- and Off-power Action |
|
|
|
(click to enlarge) |
|
| Lightweight Composite Diff Body |
(click to enlarge) |
| Moulded from XRAY's own special composite mixture, the body will not expand when temperatures rise inside the diff. The diff body is hand-ground on a precision grinding machine to ensure maximum roundness, and features a molded-in hard steel diff outdrive ring with a high-tolerance, precision-ground inner hole to ensure super-free turning of the outdrives. |
| Diff Outdrives |
(click to enlarge) |
| The active center diff outdrives are CNC-machined on precision German long-turn machines and are manufactured from HUDY toughened steel. The diff outdrives are additionally ground and strategically lightened to reduce rotating weight. The diff outdrives are then further hardened to ensure maximum strength and longest lifespan. The diff outdrive shafts are additionally precision hand-ground to a very high tolerance to ensure an ultra-smooth tight fit in the diff body and diff gear. |
| Internal Gears |
(click to enlarge) |
| The internal gears of the Active Diff™ are die-cast and pressed from high-grade steel material using very high pressure to ensure a very strong core, and then are specially hardened to ensure minimal wear and longest life. |
| Diff Gear |
(click to enlarge) |
| The diff gear is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. The gears are individually machined on a precision German gear machine and every gear is individually tested and inspected. The diff gear is then laser engraved with “Active 42T” for easy and instant recognition. An optional 41T gear and 43T gear are also available. |
|
(click to enlarge) |
|
| Active Diff™ Segments |
(click to enlarge) |
| Active Diff™ segments are CNC-machined from very tough steel, and have very precisely-machined “V” ramp grooves with different angles for easy engagement/disengagement adjustment. The segments are hardened to ensure long lifespan. The Active Diff™ comes standard with a 90° segment, while a 120° segment is optionally available. |
| Active Diff™ Action |
|
| The action of the Active Diff™ is easily adjusted using different internal segments: standard 90° segment, or optional 120° segment. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
#355063 XB808 F/R Diff. Outdrive Adapter - Lightweight - HUDY Spring Steel™ (2)
• CNC-machined diff outdrive adapters
• Fits XB808 front/rear diff
• HUDY Spring Steel™
• Lighter than standard adapters
• Reduced rotating weight
• Machined on precision German long-turn machines
• Additionally ground and strategically lightened
• Maximum strength
• Extra-long lifespan
• Precision hand-grinding
• Super-high tolerance
• Ultra-smooth tight fit in the diff body and diff gear |
|
(click to enlarge) |
| New diff outdrive adapters for XB808 front/rear differential made of self-developed, world-renowned HUDY Spring Steel™ - the toughest steel material available. The outdrives have been strategically machined to be lighter than the standard #355062 diff outdrive adapters. Special elongated design secures the drive shafts so they do not fall out in heavy jumps. For serious racers who are conscious of weight savings. Set of 2. |
|
|
| CNC-machined on precision German long-turn machines. Additionally ground and strategically lightened to reduce rotating weight, then further hardened to ensure maximum strength and extra-long lifespan. Final precision hand-grinding ensures a very high tolerance to ensure an ultra-smooth tight fit in the diff body and diff gear. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
355162 XB808 Active Diff™ Outdrive Adapter - Lightweight - Hudy Spring Steel™ (2)
• CNC-machined diff outdrive adapters
• Fits XB808 Active Diff™
• HUDY Spring Steel™
• Lighter than standard adapters
• Reduced rotating weight
• Machined on precision German long-turn machines
• Additionally ground and strategically lightened
• Maximum strength
• Extra-long lifespan
• Precision hand-grinding
• Super-high tolerance
• Ultra-smooth tight fit in the diff body and diff gear
|
|
(click to enlarge) |
|
|
|
XRAY offers lightweight CNC-machined diff outdrive adapters for XB808 Active Diff™. Made from world-renowned HUDY Spring Steel™ - the toughest steel material available - the outdrives have been strategically machined to be lighter than the standard #355161 Active Diff™ outdrive adapters. For serious racers who are conscious of weight savings.
CNC-machined on precision German long-turn machines. Additionally ground and strategically lightened to reduce rotating weight, then further hardened to ensure maximum strength and extra-long lifespan. Final precision hand-grinding ensures a very high tolerance to ensure an ultra-smooth tight fit in the diff body and diff gear.
Fits #355102 XB808 front gear active differential. Set of 2.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
353561 Alu Rear Wing Shim
Alu rear wing shim for XB and XT series buggies and truggies. Provides
additional support to prevent wing from pulling off from mounting screws.
Set of 2.
|
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
|
355127 Active Diff Segment 120°
• Immediate diff response
• For slippery & flat tracks
• Tough hardened steel
• Long lifespan
• Low wear
• Precision machined 120 grooves
• Laser engraved
|
|
|
XRAY Active DiffT segments are CNC-machined from very tough steel, and have very precisely-machined "V" ramp grooves with 120 angle for easy disengagement adjustment. The segment is hardened to ensure long life and durability. The segments are laser engraved with "120" for easy and instant recognition.
The 120 segments give more immediate response both on- and off-power. On-power the diff becomes very hard immediately (no delay); off-power the diff becomes free immediately (no delay). For use on slippery and/or flat
tracks. Set of 2. |
|
(click to enlarge) |
|
|
|
• 41T Front Diff Bevel Gear
• Tightest tolerance, perfect fit
• For slippery tracks
• Increased stability
• Special HUDY steel
• Additionaly hardened to the core
• Precision Ground
• Slight on-power understeer
• Individually machined, tested, inspected
• Low wear
• Extra-long lifespan |
|
|
355041 Front Diff Large Bevel Gear 41T
41-tooth large bevel gear for front differential is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. The gears are individually machined on a precision German gear machine and every gear is individually tested, inspected, and run in. The diff gear is then laser engraved with "41T" for easy and instant recognition.
Our special heat treatment makes the gear very hard and strong not only on the surface but also in the core, thus give the gear an extraordinarily-long lifespan with very low wear comparing to standard gears.
This gear is recommended for slippery tracks. Offers increased stability while introducing a slight amount of on-power understeer. |
|
(click to enlarge) |
|
|
|
355141 Active Diff Large Bevel Gear 41T
Active Diff Large Bevel Gear 41T The 41T diff bevel gear for XRAY Active DiffT is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. The gears are individually machined on a precision German gear machine and every gear is individually tested and inspected. The diff gear is then laser engraved with "Active Diff 41" for easy and instant recognition.
This gear is recommended for slippery tracks. Offers increased stability while introducing a slight amount of on-power understeer. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
| Alu collar provides even spacing between the bearings in front/rear diff bulkhead blocks. With capturing screws tightened, both bearings are strengthened in the block so they can support more load thus improving bearing life span. Set of 2. |
|
(click to enlarge) |
|
|
(click to enlarge) |
| Authentic XRAY 16° alu caster blocks for XB808 are CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. |
|
(click to enlarge) |
| Lightweight block features ‘zero kingpin’ suspension geometry. The preset 16° caster block are integrated and non-adjustable. Combined with the XB808 front kick-up of 10° this block gives a total caster angle of 26° for increased steering and precision. Includes XRAY composite bushings for super-precise and smooth steering action. Laser-engraved with the XRAY registered logo for authenticity, and caster value and L/R symbol for quick and easy identification. |
|
(click to enlarge) |
| Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. |
|
(click to enlarge) |
|
|
(click to enlarge) |
355102 XB808 Active Diff™
The unique XRAY Active Differential is a high-performance, adjustable front gear differential for XB808 buggies… vastly improving the buggy’s speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction and stability to the buggy, making it faster and easier to drive. |
|
(click to enlarge) |
| While the XRAY Active Differential is a performance option for serious racers who want to gain an edge on superior speed and handling, it is also of great benefit to any level of driver that wants to a more predictable and easy-to-drive car in any racing conditions. |
|
(click to enlarge) |
|
| Feature Summary: |
|
• High-performance adjustable front Active Differential for improved speed & handling
• Designed for XB808 models
• Fully adjustable on- and off-power performance using different internal segments and gears
• Improves diff action and increases traction
• Easy and consistent steering
• Designed for serious racers, benefits all levels of racers |
| On- and Off-power Action: |
|
|
|
(click to enlarge) |
|
| Feature Descriptions: |
|
|
| Lightweight Composite Diff Body |
(click to enlarge) |
| Moulded from XRAY's own special composite mixture, the body will not expand when temperatures rise inside the diff. The diff body is hand-ground on a precision grinding machine to ensure maximum roundness, and features a molded-in hard steel diff outdrive ring with a high-tolerance, precision-ground inner hole to ensure super-free turning of the outdrives. |
| Diff Outdrives |
(click to enlarge) |
| The diff outdrives are CNC-machined on precision German long-turn machines and are manufactured from self-developed, world-renowned HUDY Spring Steel™ – the toughest steel material available. The diff outdrives are additionally ground and strategically lightened to reduce rotating weight. The diff outdrives are then further hardened to ensure maximum strength and longest lifespan. The diff outdrive shafts are additionally precision hand-ground to a very high tolerance to ensure an ultra-smooth tight fit in the diff body and diff gear. |
| Internal Gears |
(click to enlarge) |
| The internal gears of the Active Diff are die-cast and pressed from high-grade steel material using very high pressure to ensure a very strong core, and then are specially hardened to ensure minimal wear and longest life. |
| Diff Gear |
(click to enlarge) |
| The diff gear is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. The gears are individually machined on a precision German gear machine and every gear is individually tested and inspected. The diff gear is then laser engraved with “Active 40T” for easy and instant recognition. An optional 38T gear is also available. |
|
(click to enlarge) |
|
| Active Diff Segments |
(click to enlarge) |
| The Active Diff segments are CNC-machined from very tough steel, and have very precisely-machined “V” ramp grooves with different angles for easy engagement/disengagement adjustment. The segments are hardened to ensure high life. The Active Diff comes with standard with a 90° segment, while a 120° segment is available optionally. |
| Active Diff Action |
|
| The action of the Active Diff is easily adjusted using different internal segments: standard 90° segment, or optional 120° segment. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
| Lightweight block features ‘zero kingpin’ suspension geometry. The preset 14° caster block is integrated and non-adjustable. Combined with the XB808 front kick-up of 10° this block gives a total caster angle of 24° for increased steering and precision. Includes XRAY composite bushings for super-precise and smooth steering action. Laser-engraved with the XRAY registered logo for authenticity, and caster value and L/R symbol for quick and easy identification. |
|
(click to enlarge) |
| Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. |
|
(click to enlarge) |
|
|
|
| Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. |
|
(click to enlarge) |
|
|
(click to enlarge) |
354111 Graphite Ventilated Brake Disk - CNC Machined (2)
CNC-machined graphite ventilated brake disk.
When using this graphite brake disk, it is necessary to use hardened steel brake pads (#354121) by themselves without Ferodo fibre-style brake pads glued to them. |
|
(click to enlarge) |
| All XRAY graphite parts are CNC-machined in-house using state-of-the-art fully automatic German CNC-milling machines, ensuring the tightest tolerances and highest manufacturing quality. Manufactured from high-grade, custom-manufactured carbon graphite that is specially produced based on XRAY’s own recipe and specifications. |
|
(click to enlarge) |
|
|
(click to enlarge) |
| Lightweight block features ’zero kingpin’ suspension geometry. The preset 10° caster block is integrated and non-adjustable. Combined with the XB808 front kick-up of 12° this block gives a total caster angle of 22° for increased steering and precision. Includes XRAY composite bushings for super-precise and smooth steering action. Laser-engraved with the XRAY registered logo for authenticity, and caster value and L/R symbol for quick and easy identification. |
|
(click to enlarge) |
| Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. |
|
(click to enlarge) |
|
|
(click to enlarge) |
355212 XB808 Alu CVD Drive Axle - Hardcoated (4)
CNC-machined CVD drive axle for XB808 made from premium lightweight Swiss 7075 T6 hardcoated aluminum. Strategically-machined, super-lightweight drive axles are specially designed and produced for high-competition racing. The reduced weight is almost 3x less than the stock wheel axle, with a total weight saving of up to 20g for all 4 wheel axles. |
|
(click to enlarge) |
Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time.
Fits XB808. Set of 4. |
|
|
| NOTICE: It is important to note that while these axles are very strong they do have a more limited lifespan than steel versions, and as such they should be inspected more frequently. |
|
(click to enlarge) |
|
|
(click to enlarge) |
355053 Center Diff Spur Gear 43T
355055 Center Diff Spur Gear 41T
Large bevel gears for center differential are machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives. |
|
(click to enlarge) |
The gears are individually machined on a precision German gear machine and every gear is individually tested, inspected, and run in. The diff gears are then laser engraved for easy and instant recognition.
Our special heat treatment makes the gear very hard and strong not only on the surface but also in the core, thus give the gear an extraordinarily-long lifespan with very low wear comparing to standard gears. |
|
(click to enlarge) |
|
|
(click to enlarge) |
Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.
Smart XRAY engineering includes use of composite bushings to secure ball-bearings in both sides of the steering block, allowing perfect fitment and smooth operation to ultimately impart much higher lifetime compared to bearings installed directly into aluminum steering blocks. |
|
(click to enlarge) |
Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. Laser-engraved with the XRAY registered logo for authenticity, and L/R symbol for quick and easy identification. |
|
(click to enlarge) |
|
|
(click to enlarge) |
| Clutchbells for XB808, manufactured on a precision manual gear machine from HUDY Gear Steel - a material specially formulated and developed for use in gears. Heat treated for highest strength, minimal wear and extra-long lifespan. The XB808 clutchbell features unique oversized ball-bearings designed and engineered by XRAY. |
|
(click to enlarge) |
| Replacing the standard 5x10 bearings with 1.3mm balls, the oversized 808 clutch bearings are 5x12 with 2.0mm balls and extra-thick bearing walls. This translates to higher load-carrying capabilities which will increase the life of the bearings and reduce the risk of clutch bearing failure during long final runs. The bearings come with special high-temperature resistant grease to ensure proper lubrication during high-revving engine operations and long runs. |
|
(click to enlarge) |
|
|
(click to enlarge) |
|
|
(click to enlarge) |
| Smart XRAY engineering includes use of composite bushings to secure ball-bearings in both sides of the hub carrier; allowing perfect fitment and smooth operation to ultimately impart much higher lifetime compared to bearings installed directly into aluminum hub carriers. |
|
(click to enlarge) |
| Additional roll center adjustments are possible through the use of composite roll center bushings which can be inserted in two different orientation positions for the pivot pin. Holes in the upper position are equal to the standard composite roll center position, while holes in the lower position give a -2mm lower roll center. |
|
|
Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. Laser-engraved with the XRAY registered logo for authenticity.
It’s easy, it’s smart, it’s XRAY. |
|
(click to enlarge) |
|
|
(click to enlarge) |
| Front anti-roll bar wires of different thickness are optionally available for fine-tuning the setup of your XB808. XRAY anti-roll bars are manually manufactured in-house from premium heat-treated spring steel wire using precision bending machines that ensure equal side angles. Manually measured, selected, and straightened to eliminate all tweak. |
|
(click to enlarge) |
|
|
(click to enlarge) |
| Rear anti-roll bar wires of different thickness are optionally available for fine-tuning the setup of your XB808. XRAY anti-roll bars are manually manufactured in-house from premium heat-treated spring steel wire using precision bending machines that ensure equal side angles. Manually measured, selected, and straightened to eliminate all tweak. |
|
(click to enlarge) |
|
|
(click to enlarge) |
| Lightweight block features ’zero kingpin’ suspension geometry. The preset 10° caster block is integrated and non-adjustable. Combined with the XB808 front kick-up of 10° this block gives a total caster angle of 20° for increased steering and precision. Includes XRAY composite bushings for super-precise and smooth steering action. Laser-engraved with the XRAY registered logo for authenticity, and caster value and L/R symbol for quick and easy identification. |
|
(click to enlarge) |
| Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. |
|
(click to enlarge) |
|
|
(click to enlarge) |
XRAY presents the ultimate high-performance racing springs that have been specially developed to give better balance and an additional range of choices to fine-tune your car.
Developed through extensive testing and racing experience, these linear springs use the same thickness of wire for each spring, and stiffness is controlled by the number of coils. Softer springs have a lower "C" value and more coils; stiffer springs have a higher "C" value and fewer coils. |
|
(click to enlarge) |
| Available as a pair of springs - to fit front and rear - the springs are individually measured, controlled, inspected and matched to provide identical damping characteristics. During the selection process, each spring is compressed in several fine increments and the values recorded, and then each spring is matched with another spring of identical characteristics. XRAY goes the extra mile to ensure perfect spring matches, giving your car the predictability and consistency that you need to help you lead the pack. |
|
(click to enlarge) |
|
|
(click to enlarge) |
351341 XB808 Graphite Upper Plate
Authentic XRAY optional lightweight graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight. Fits XB808. |
|
(click to enlarge) |
| All XRAY graphite parts are CNC-machined in-house using state-of-the-art fully automatic German CNC-milling machines, ensuring the tightest tolerances and highest manufacturing quality. Manufactured from high-grade, custom-manufactured carbon graphite that is specially produced based on XRAY’s own recipe and specifications. |
|
(click to enlarge) |
| All XRAY graphite parts are CNC-machined in-house using state-of-the-art fully automatic German CNC-milling machines, ensuring the tightest tolerances and highest manufacturing quality. Manufactured from high-grade, custom-manufactured carbon graphite that is specially produced based on XRAY’s own recipe and specifications. |
|
(click to enlarge) |
|
|
(click to enlarge) |
352573 XB808 Alu Steering Plate Swiss 7075 T6 (3mm) - Hard Coated
Authentic XRAY alu steering plate for XB808 is CNC-machined from 3mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Lightweight, ultra-rigid design for unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity. |
|
(click to enlarge) |
Features an additional middle Ackermann setting position for even more precise and smoother Ackermann steering setup.
Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. |
|
(click to enlarge) |
|
|
(click to enlarge) |
352087 XB808 Front Alu Brace Swiss 7075 T6 (5mm) - Hard Coated
Authentic XRAY front alu brace for XB808 is CNC-machined from 5mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-rigid design and unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity. |
|
(click to enlarge) |
Reinforces chassis rigidity in longitudinal direction, helping to stabilize the front suspension when the front of the car is too sensitive.
Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. |
|
(click to enlarge) |
353086 XB808 Alu Rear Brace Swiss 7075 T6 (5mm) - Hard Coated
Authentic XRAY rear alu brace for XB808 is CNC-machined from 5mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-rigid design and unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity. |
|
(click to enlarge) |
Provides a solid link between the rear shock tower and the main chassis plate to increase overall chassis stiffness.
Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. |
|
(click to enlarge) |
|
|
(click to enlarge) |
352093 XB808 Front Alu Shock Tower Swiss 7075 T6 (3mm) - Hard Coated
Authentic XRAY front alu shock tower for XB808 is CNC-machined from 3mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-rigid design for unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity. |
|
(click to enlarge) |
| Shocks can be mounted in multiple different positions, which were thoroughly tested and analyzed both in virtual reality as well as on-track to offer the widest possible range of shock positions. This guarantees sufficient suspension travel and best setup for flat European-style tracks or large bumpy US-style tracks. |
|
(click to enlarge) |
| Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. |
|
(click to enlarge) |
353093 XB808 Alu Rear Shock Tower Swiss 7075 T6 (3mm) - Hard Coated
Authentic XRAY rear alu shock tower for XB808 is CNC-machined from 3mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-rigid design for unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity. |
|
(click to enlarge) |
| Shocks can be mounted in multiple different positions, which were thoroughly tested and analyzed both in virtual reality as well as on-track to offer the widest possible range of shock positions. This guarantees sufficient suspension travel and best setup for flat European-style tracks or large bumpy US-style tracks. |
|
(click to enlarge) |
| Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. |
|
(click to enlarge) |
|
|
(click to enlarge) |
352303 XB808 Alu Front Lower Susp. Holders Set - Swiss 7075 T6 (7mm) - Hard Coated
Authentic XRAY set of alu front lower suspension holders for XB808, CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Includes all parts necessary for complete front suspension holder system upgrade. |
|
(click to enlarge) |
| XRAY I.S.S. (Integrated Suspension Settings) gives adjustable front roll center geometry in a range of 2mm (-1mm, 0mm, +1mm), and new reinforced bushings (included) have 1° and 0.5° eccentricity for front kick-up adjustment. Super-fine adjustments can be made by increments of 0.5°. Includes heavy-duty suspension pivot pins that have been heat treated for increased strength. |
|
(click to enlarge) |
| Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. Laser-engraved with the XRAY registered logo for authenticity. |
|
|
| Individual parts of the suspension holder set are also available separately as spare parts. |
|
(click to enlarge) |
353303 XB808 Alu Rear Lower Susp. Holders Set - Swiss 7075 T6 (7mm) - Hard Coated
Authentic XRAY set of alu rear lower suspension holders for XB808, CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Includes all parts necessary for complete rear suspension holder system upgrade. |
|
(click to enlarge) |
| XRAY I.S.S. (Integrated Suspension Settings) gives adjustable rear anti-squat in a range of 0°-4°, and adjustable rear toe-in geometry in a range of 2°-4°. Includes various holders (0°-2° and 2°-4°) and heavy-duty suspension pivot pins that have been heat treated for increased strength. |
|
(click to enlarge) |
| Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. Laser-engraved with the XRAY registered logo for authenticity. |
|
|
| Individual parts of the suspension holder set are also available separately as spare parts. |
|
(click to enlarge) |
|
|
(click to enlarge) |
358714 XB808 Alu One-Piece Engine Mount - Swiss 7075 T6 - Hard Coated
Authentic XRAY optional 1-piece engine mount for XB808 is CNC-machined from premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. |
|
(click to enlarge) |
| Providing not only solid engine mounting and easy adjustment, the unique keyed-mount design allows for the easy removal and replacement of the engine without the need for gear mesh re-adjustment. |
|
(click to enlarge) |
The smartly-designed mounting system consists of two components: and adjustable base (which is affixed to the chassis), and a pair of upper mounts (which stay attached to the engine crankcase) that key to the base. This enables the engine to be mounted and dismounted each time without needing gear mesh re-adjustment.
Engine mounts are designed to allow easy access to the engine’s rear cover so you do not have to dismount the engine at any time.
Optional upper mounts are available for either Nova- or Picco-based engines. Engine swaps are now super easy! You can have few engines prepared in your pit box with the engine mounts attached; then just simply remove one engine from the base mount and replace it with another. |
|
(click to enlarge) |
| Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. Laser-engraved with the XRAY registered logo for authenticity. |
|
(click to enlarge) |
| Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. Laser-engraved with the XRAY registered logo and part number for easy identification. |
|
|
|
|
