Winner of multiple "Car of the Year" awards and dominating winner of all major titles – including World Champion, European Champion, USA Champion, Asian Champion and  dozens of National champion titles all around the world – the NT1 continues to prove its unbeatable racing pedigree.

With XRAY's uncompromising design philosophy bringing everything together to make the best nitro touring car, the NT1 has the unique XRAY character, born of precision craftsmanship, highest attention to detail, and using only the finest quality materials. For drivers with an irrepressible drive to win, the NT1 is the answer.

The all-new chassis works together with the new rear bulkheads, rear arm mounts, and front brace to create the flex adjustments to easily tune for varying traction levels or change handling dynamics. The chassis plate features a larger rear window for improved flex characteristics, and a revised mounting location for the front brace to simply installation and maintenance.

The lightweight chassis is CNC-machined from premium Swiss 7075 T6 aluminum, strategically machined in low-stress areas to make it as light as possible without adversely affecting strength or rigidity. 

The all-new aluminum rear bulkheads have been completely redesigned to integrate with the new flex adjustement system. The bulkheads extend forward under the 2-speed shaft with a 0.5mm space between the chassis and bulkheads.

Both front and rear bulkheads were redesigned to fit the new anti roll bar composite bushing which extends the life of the bulkheads.

The clamps hold the rear shock tower as well as the graphite roll-center bridge. For an extra roll-center adjustment, the graphite roll-center bridge can be removed and the rear linkage mounted directly to the upper clamps to improve cornering speed and steering in very high-traction conditions.

The super-lightweight clamps have a very clean and lightweight design to create the lowest weight and CG, and still allow for easy access to the driveline for maintenance.

All-new rear arm mounts were redesigned to use the square composite bushings from the T4 and XB4 cars. The square eccentric bushings retain the vertical adjustment of the inner hinge pins from the previous NT1’s, but add the ability to adjust the pin width to expand the roll center and geometry adjustments available for the rear suspension.

The outside position of the square insert places the rear arms at the same width as it was on the previous NT1s.

The new inner position choices narrow the pin locations to help generate more rear traction and improve stability.

The narrow positions are recommended on low-medium traction tracks as it helps to improve rear traction and stability of the car on-power. Wider positions are recommended to use on high tractions tracks as the car has better rotation and off power steering.

All-new front wire anti-roll bar was redesigned for easier installation, smoother operation and minimal play. The composite bushing for the ball bearings eliminate vibration and slop between the parts, eliminating bulkhead wear and improving bar operation.

The arm-to-bar linkage length is quickly adjustable while installed on the vehicle using only an allen driver…quick & easy.

A 2.0mm front anti-roll bar wire is included with several options bars available to tune steering response and stability.

The NT1 still includes both wire & blade-style front anti-roll bars for freedom of choice based on track conditions.

Like the front wire bar, the new rear wire anti-roll bar was redesigned with to work with the new bar collars and composite bearing inserts to reduce slop and improve operation.

Rear anti-roll bar height is adjustable via a screw…quick & easy.

The kit includes a 2.0mm wire rear anti-roll bar. The thickness of each anti-roll bar is laser-engraved for easy identification. Anti-roll bar wires of different thickness are optionally available for fine-tuning.

Smooth flowing lines, distinctive design touches, a sculpted lightweight platform – the NT1 is an expression of power, dramatic styling, superior technology, pure luxury and performance. The ultimate expression of racing passion. The art of performance. NT1.

Martin Hudy
XRAY NT1 Platform Designer

Since the release of the first XRAY NT1 nitro touring car, XRAY has been a driving force in the 1/10 nitro touring car racing scene. Continuous development and evolution of the XRAY product line has lead to ever-increasing performance. 

Designed, developed, and fully manufactured in-house at the XRAY factory in Slovakia, Europe, using the most high-tech German & Swiss machines and premium European materials, crafted with XRAY's legendary attention to detail by our artistic production specialists. The NT1 is truly a masterpiece.

At the heart of XRAY's philosophy it is a firm commitment to perfection when it comes to engineering, design, performance and support, all made possible by state-of-the-art in house manufacturing. 

The NT1 is luxury model racing car and as such features only the finest, most premium materials: premium woven graphite - exclusive top-secret HUDY Spring Steel™ - high grade Swiss 7075 T6 - high-tensile heat-treated steel and aircraft aluminum - and XRAY's self-developed and formulated composite compounds. All is premium and unique on the NT1.

The main backbone of the car consists of high-precision, high-strenghth aluminum bulkheads and aluminum suspension holders mounted to the aluminum chassis.

All bulkhead parts are CNC-machined from premium Swiss 7075 T6 aluminum and have been designed to provide the lightest and strongest possible support framework for the car with maximum flex characteristics to increase the traction.

The bulkheads are anodized in a distinctive orange color. XRAY’s legendary attention to detail is noticeable in all the precisely chamfered edges.

Color may vary slightly between products.

Redesigned front upper arm holders not to touch front bulkheads, offering improved flex of the front suspension, and better forward traction.

The aluminum front middle shaft holder is inserted into the chassis for better centering.

The smart design allows easier access to the front belt and pulley for quick & easy front belt changes and maintenance.

The muffler mounting system is incorporated into the front middle shaft holder. This design helps to ensure that the muffler is mounted independently from the radio plate and chassis so there is no flex transfer. The extra-long muffler wire fits all standard mufflers.

Rear layshaft bulkheads allow use of bracket bushings to connect the layshaft bulkheads to the rear bulkheads to reinforce the entire rear suspension. There are two flex settings of 2-speed bulkheads:

SOFT – Bracket bushings not installed. The car has more traction. Recommended for low-traction conditions.

STIFF – Bracket bushings are installed. The car is more free.  Recommended for high-traction conditions.

The rear graphite stiffener – made from 2mm graphite material – was designed to enhance the flex characteristics around the engine area. The brace is mounted on the right side between the 2-speed bulkhead and the adjacent aluminum radio plate mount. The graphite stiffener provides optimized flex characteristics and can be easily removed when extra steering needed. An optional rear stiffener link is available to offer an in-between stiffness setting.

Radio plate mounts are made from Swiss 7075 T6 aluminum instead of composite material for improved flex characteristics. The mounts are located equidistant from the center centerline, as well as inline for more equal chassis flex characteristics.

A radio plate design allows mounting of the plate on the equidistant, aligned aluminum radio plate mounts for more equal chassis flex characteristics.

The front part of the radio plate was redesigned for improved in-corner steering, as well as improved flex of the front suspension for better forward traction.

Front Multi-Flex™ adjustment via the radio plate bushing in the servo saver area is a very useful feature. When the bushing is installed, the fixed setting is activated; when the bushing is removed, the screw is directly mounted on the servo saver post and the whole front suspension has increased flex. The fixed setting is recommended when there is sufficient in-corner steering. To increase the in-corner steering, the flex setting can be easily adjusted. 

The 75cc fuel tank with hypertonic tank lid and internal stone-type filter is positioned in the center of the car, and features a unique low-profile design to allow the fuel tank to sit as low as possible. The fuel tank is mounted with rummber grommets and O-ring with a special screw to reduce vibration. With extra space around the fuel tank in the radio plate, the fuel tank has greater movement in all directions which improves fuel pickup and scavenging as fuel is used up.

The fuel tank is molded from a special composite mixture which guarantees it to be extremely strong and robust. The fuel tank is glued together using a special self-developed robotic system that ensures maximum accuracy and precision in pre-heating and gluing.

The receiver battery pack is located beneath the fuel tank to help create a low CG. Using the optional micro-size receiver battery pack allows the fuel tank to be lowered by another 3mm, creating an ultra-low nitro touring platform.

The battery holder allows to fit the most common LiPo or LiFe batteries. The receiver battery pack can be easily removed from below the fuel tank by a quick access composite cover at the bottom of the chassis.

Optional graphite cover contains a special CNC-machined pocket in which to place the batteries, allowing the batteries to sit as low as possible. The main feature of the graphite cover is its integrated Multi-Flex Technology™ functionality to additionally reinforce the chassis in the vertical plane.

Compact lightweight radio case features a clean design and layout. The radio case is attached to the side of the radio plate and will fit any standard-size receiver and optional switch with water-resistant rubber cover.

Graphite roll-center bridge made from thicker 4mm material removes unwanted flex of the rear suspension and improves cornering speed.

The roll-center bridge features six roll-center positions for the rear upper linkage (identical to previous versions). 

The brake pads are made from the SLS material for smoother, more consistent braking.

Brake inputs are transferred precisely to the brakes by the ball-raced, super-smooth brake cam. The steel brake cam is machined from self-developed HUDY Spring Steel™ to ensure the longest possible lifespan, maximum strength, and lowest weight. Brake pad backing plates are made from laser-cut steel.

The laser-cut, precision flat-ground ventilated steel brake disk allows for true, wobble-free rotation. 

Graphite rear shock tower is machined from thicker graphite 3.5 material for improved high-speed steering. Body posts are mounted wider on the shock tower for better stability.

Machined from premium grade 2.5mm (front) and 3.5mm (rear) graphite, the shock towers are small and lightweight. The well-proven shock mounting positions remain unchanged. 

The shocks provide maximum traction and steering characteristics, and optimized up & down travel. Long shock bodies accommodate the long shock shafts, and pistons are made from special white Delrin™ material with optimized hole number and sizes.

Shock rods have been specifically hardened to ensure long life and maximum strength.

The set of pistons include 2 and 3-hole pistons with 1.0, 1.1, and 1.2mm diameter holes. The pistons are molded using special methods from Delrin™ material to ensure extreme roundness, while maintaining maximum stiffness and durability.

Shock bodies are CNC-machined from premium Swiss 7075 T6 aluminum and hardened to ensure maximum lifespan. External fine threading allows for quick & easy ride height adjustment. The shocks feature low-profile membranes for super-smooth, precise damping.

The NT1 comes equipped with C5.4 springs in the front to provide maximum stability and steering, and C4.0 springs in the rear to provide maximum traction and cornering speed.

The NT1 springs, like all other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.

With the intelligent design and construction of all drivetrain parts, the transmission is supersmooth and low-friction. From the small diffs, through the efficient ratios and lightweight pulleys, to the high-speed lightly-oiled bearings and lightweight drivetrain parts, all parts are designed for maximum efficiency and durability.

The tiny drive shafts are manufactured from HUDY Spring Steel™, the most effective drive shaft material by the industry leader HUDY. Self-developed HUDY Spring Steel™ ensures the longest possible drive shaft life, maximum strength, and lowest weight.

NT1 front constant velocity drives (CVDs) and rear dogbone drive shafts are manufactured from HUDY Spring Steel™. The drive shafts are some of the world‘s thinnest yet most durable drive shafts used.

The rear drivetrain features dogbone drive shafts which help to generate more traction for the car. To accommodate the dogbone style drive shafts, the rear wheel axles were also updated.

Hardened with a proprietary process, the drive shafts provide unbeatable lifetime and reliability. 

The diffs in the NT1 are small and light, ensuring lowest rotating mass and lowest CG. Rubber-sealed composite differential housings are molded from a special composite mixture that ensures non-expansion and non-deformation during operation and long runs, which would otherwise negatively influence the free movement of the gears inside. Differential gears are made from pressed steel, heat-treated and machined for ultra-precise and smooth operation.

All pulleys are molded from a special composite mixture to ensure low-friction operation, efficient and strong tooth profiles, and long lifespan. 

The drivetrain includes PUR®-reinforced high-efficiency, low-friction drive belts to ensure that power is properly & efficiently transferred to all drivetrain parts. 

The 2-speed transmission parts are installed on a precision-manufactured super-smooth middle layshaft made from tough HUDY shaft steel for 2-speed, which is additionally heat-treated for extra strength and long life. The 2-speed gear adapter is CNC-machined from Swiss 7075 T6 for precise fitting of the one-way bearing, and allowing super-precise and wobble-free installation of the spur gears. The high-quality German one-way bearing is hand-ground before installation for maximum running precision and strength. The 2-speed adapter is manufactured from hardened steel. 

The reverse clutch design provides smoother and faster acceleration, while increasing the lifespan of the clutch shoe.

Easily-adjustable 3-shoe XCA (XRAY Centrifugal-Axial) clutch features clutchbell, clutch nut, flywheel nut, and thrustbearing collar made from exclusive HUDY Spring Steel™.

The hardcoated flywheel, clutch disc, and spring cup are made from premium Swiss 7075 T6.

Precision-molded spur gears are made from XRAY's exclusive secret blend of composite material, allowing the gears to run true and super quiet, and be robust enough to handle the power of a modern nitro engine.

The spur gears are molded with a special technique allowing the gears to be absolutely true thus improving the drivetrain efficiency. Each gear is stamped with a tooth number for easy identification.

The intelligent engine mount design allows the setting & fixing of the engine position to ensure optimal gear mesh. Thanks to the specially-shaped gear teeth, the gears always have the same gear mesh which ensures that the engine can be set in position without the need for constant fine-tuning.

After initial gear mesh is set, the engine position is permanently set; the engine can be installed & re-installed repeatedly without the need to re-adjust the gear mesh.

NT1 includes XRAY pinion gears machined from tough 7075 T6 alu and specially hardcoated for supreme strength, light weight, and high durability. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. Fine internal threading allows easy installation on XCA clutchbells (standard or lightweight versions). Each pinion is fine etched with the tooth number for easy & quick identification.

Redesigned engine mounts offer improved and more equal chassis flex under the engine area.

Both front & rear upper clamps feature integrated belt-tension adjustment using adjustable bearing eccentric holders. All ball-bearings turn in composite hubs to reduce friction and improve drivetrain efficiency.

The NT1 features I.S.S. (Integrated Suspension Settings™) design. All adjustment possibilities are completely integrated, allowing complete set-up changes without changing or replacing any parts - no need for optional roll-center, anti-dive or anti-squat blocks. Using eccentric bushings anti-dive and anti-squat can be adjusted easily.

High-tensile steel suspension pivot pins are polished for smooth suspension action, and all pivot pins are captured to eliminate the need for E-clips.

Front upper arms are made from softer material for improved in-corner steering and better forward traction.

The NT1 suspension arms are the result of long-term testing of different designs and layouts. Length, thickness, flexibility, geometry of suspension points and materials used… these are all the concepts and details that had to be thoroughly reviewed to create optimal suspension arms.

The exclusive composite mixture used for suspension arms is a perfect balance between reliability and performance. The suspension arm itself is rigid enough to provide a responsive feel, yet soft enough to provide extreme durability.

The tiny yet tough steering blocks are molded from a special composite mixture for maximum strength. Thanks to perfect molding, bearings fit into the steering block without any extra play to give maximum stability.

The steering blocks were designed for use with an aluminum Ackermann plate which allows greate Ackermann and bump-steer adjustment range. The aluminum Ackermann plate is mounted to the steering block and features 3 different Ackermann positions.

The plate is also mounted lower compared to previous steering block designs, which allows the steering linkage to be moved lower to gain more bumpsteer (giving increased steering response and improved in-corner steering). Bump steer can be easily changed by adding or removing shims.

The kit includes 0° kingpin steering blocks. Optional 1° kingpin steering blocks are available for more in-corner steering.

The steering blocks also accommodate the mounting of optional graphite Aero discs for improved steering.

The compact rear uprights are small in size but are very strong due to the special composite mixture used. Thanks to perfect molding, bearings fit into the rear uprights without any extra play and therefore give maximum stability.

The rear uprights feature 2 positions for mounting the upper roll-center linkage, to allow changes to the roll-center position.

The rear uprights accommodate the mounting of optional graphite Aero discs for improved stability and traction.

Ultra-lightweight wheel hex drive hubs are CNC-machined from Swiss 7075 T6 black-coated aluminum. These ultra-true hex hubs have a clamping design which ensures ultra-solid mounting of the wheel on the hub.

The alu hex hubs are specially machined to reduce rotating weight while guaranteeing wobble-free wheel mounting.

Optional offsets of -0.75mm and +0.75mm are available to adjust track-width.

Front steel suspension pivot balls have a smaller diameter between the ball and thread to allow an increase in steering angle for increased cornering speed and out-of-corner steering.

The NT1 pivot ball suspension contains precision pivot balls which are specially hardened for enhanced lifespan and to withstand hard crashes. A total of eight (8) pivot balls are included, captured by strong M10 composite nuts to minimize weight and give smooth suspension movement.

Standard pivot balls are made from steel for maximum durability and lifespan. Optional lightweight aluminum or titanium pivot balls are also available.

The blade anti-roll bar is used for improved cornering speed on larger, open tracks. The front blade-style anti-roll bar is fully-adjustable, and is fully independent from downstop adjustment. The hand-ground front anti-roll bar blades — manufactured from HUDY Spring Steel™ for long lifespan — are easily adjusted using a 1.5mm hex wrench.

To guarantee maximum reliability, all turnbuckles are manufactured from special HUDY Spring Steel™ material for turnbuckles for maximum core strength. 

Car holder features an eyelet which allows the fuel tank opener string to be captured securely and ensure more consistent refueling.

Adjustable side-belt tensioner is mounted directly to the aluminum radio plate holder instead of graphite mount that eliminates wear. 

The centralized servo saver is ball-raced to ensure super-precise, smooth operation, and adjustable spring preload tension allows for fine tuning. The servo saver also features easily-adjustable Ackermann positions with easy-to-change inserts which greatly influence the steering characteristics, allowing the NT1 to be adjusted for driving styles and track conditions.

The compact front foam bumper is made from high-resilience, lightweight foam. The front upper bumper holder and lower composite bumper are molded from rigid composite to withstand hard crashes.

The NT1 is fully ball-bearing equipped and features high-speed, blue-sealed ball-bearings throughout the drivetrain for maximum drivetrain efficiency. The high-tolerance, high-performance bearings are degreased and lightly oiled with Aero Shell Fluid 12™ for maximum smoothness and long life. The main ball-bearings are oversized with extra-strong bearing frames to ensure smooth, efficient running even under extreme conditions.

The beefy 6mm thick body posts are made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage, even if you flip the car on its roof. The body supports are rounded to have a better fit and provide better support to the car body.

The radio plate features an extra hole to allow the mounting of the center body mount which protects the body from deformation while refueling and also increases car stability in high‑speed corners.

HUDY Exclusive Silicone Oils are manufactured in Europe and each batch is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-standard cSt rating, the new line of oils will be easy to identify, adjust, and feel.

When following any set-up sheets by XRAY or XRAY team drivers, you can be sure that the oils you will get for your car are exactly same as those used by the factory racing team, thus ensuring very exacting set-ups and handling.

HUDY Chem Series.

The chassis design focuses on balanced weight distribution and weight transfer. The chassis features pre-drilled holes for additional weights for optimum car balancing. Centerline holes are pre-drilled for easy balancing with the HUDY Chassis Balancing Tool #107880.

The NT1 features fully-adjustable front and rear suspension geometry: caster, camber, toe, anti-dive, anti-squat, ride height, droop, track-width, front and rear wheelbase, Ackermann and roll-centers. For quick & easy adjustment, we recommend using set-up tools and accessories from HUDY, the world leader of RC tools.

The NT1 is one of the most adjustable nitro touring cars in the world. Whether you are a hardcore racing fanatic or a club-level sportsman, you can very easily adjust the NT1 to suit your racing style, race track type, and all track conditions. To fully understand the set-up possibilities we suggest the legendary HUDY Set-up Book, loaded with over 50 pages of high-quality pictures and easy-to-read RC car set-up explanations.

Whether you are a novice driver or an experienced racer, you can easily learn many set-up tips & tricks and improve your set-up skills, ultimately translating into improved racing performance with your NT1.

The HUDY Set-up Book is available for download exclusively at www.hudy.net

XRAY Instruction Manuals have become the industry standard, and are simply the best manuals you will ever get with an RC model car. Whether you are a first-time builder or an experienced racer, all instructions are straight-forward and easy to understand. The full-colour instruction manual contains large 3D illustrations that show all assembly details in the easiest possible way.

Owning an XRAY model racing car is an experience unto itself. Not only will you own the most premium luxury model racing car in the world, but you will also become a member of the prestigious family of XRAY owners with direct support and service from the XRAY factory. XRAY brings you the most up-to-date RC Web site on the Internet, with daily racing news and the latest product developments. If you have any questions, problems or comments, you can ask the XRAY Support Team or any XRAY Factory Team Driver on the XRAY support forum. You can even upload your own set-up sheets or download from the thousands of different set-up sheets available from around the world at the exclusive XRAY Virtual Set-up Sheet Database. And that is only the start of the VIP treatment you get by joining Team XRAY.