Use a desktop browser to fully enjoy the best presentation experience

XRAY XB2 22

World Champion.

At the World’s most competitive off-road race – the World Championship, it was XRAY’s Daniel Kobbevik who brought Junior World Champion title to the all-new XB2 platform. This has been already the second Junior World Champion title for Daniel and the XB2. Tested and successfully run in the highest competition races now you can enjoy the winning platform.

USA Champion.

At one of the world’s most competitive off-road race – the ROAR National Championship, it was XRAY’s Ty Tessmann who brought the first ROAR National Champion title to the XB2 platform. Tested and successfully run in the highest competition races now you can enjoy the winning platform. 

Philosophy.

At the heart of XRAY's philosophy is a firm commitment to perfection when it comes to engineering, design, performance and support, all made possible by state-of-the-art in-house manufacturing. The XB2 is the epitome of perfection that is typical for XRAY.

Dipl. Eng. Juraj Hudy
XRAY Chief Designer

Made in Europe.

Designed, developed, and fully manufactured in-house at the XRAY factory in Slovakia, Europe, using the most high-tech German and Swiss machines and premium European materials, crafted with XRAY's legendary attention to detail by our artistic production specialists. The XB2 is truly a masterpiece. 

Commitment.

Since release of our very first XB2 we have continued with our team to work on the further improvements bringing every year a new and improved 2WD car. Tested and raced in all track conditions around the world we remain committed to our goal improving our products by continuous development and testing to ensure that you always get the best-performing XB2 straight out of the box.

Martin Bayer
XRAY XB2 Designer

 

 

 

Designed for Carpet and Dirt.

Both Dirt and Carpet edition of the XB2 are both designed specifically for the different track conditions and extensively tested in all the different tracks to ensure maximum performance right out of the box.

The XB2D was long time tested at slippery track at Hudy Arena and at various dusty European tracks till high traction tracks in USA.

The XB2C was extensively tested at the carpet track at Hudy Arena and during the whole EOS race series season at various tracks around the Europe. The Carpet edition was at the same time tested at various Astro tracks.

Uni-Platform™.

The XB2 platform works at the highest competition level in any track conditions, whether it be super-low-traction dusty tracks, medium-traction, or super-high-traction carpet or astro turf; there is an XB2 for you that will handle flawlessly in any of these conditions.
There are two different XB2 kits to choose from – Carpet Edition and Dirt Edition, both built on the same platform with full compatibility and with interchangeable parts.

The Carpet Edition is designed for medium to very-high traction conditions, while the Dirt Edition is designed for very-low to medium grip conditions.

The Uni-Platform™ allows either XB2 edition to be tuned or converted to suit any track conditions with only a few additional parts.

Chassis.

The chassis features bent sides for proper weight balance and increased traction with maximum stability of the car. The rear part of the chassis is narrow.

After extensive testing of 25 different chassis designs, the final concept was selected for its flex characteristics and layout to produce the best balance of traction and stability.

CNC-machined from high-quality 2.5mm Swiss 7075 T6 aluminum, the lightweight chassis retains the necessary strength and rigidity, and is black coated at XRAY’s own in-house fully robotic coating line.

The chassis is universal for both Dirt and Carpet edition.

Chassis.

The flex of the front part of the chassis was updated to increase reactivity and to provide more space for the electronics. Two sets of mounting holes allow installation of the optional chassis weight or electronics plate for easier maintenance and weight balance adjustments.

The rear section of the chassis was shortened to allow mounting the suspension holder directly to the gearbox independent of the chassis plate.

The flex of the front part of the chassis was updated to increase reactivity and to provide more space for the electronics. Two sets of mounting holes allow installation of the optional chassis weight or electronics plate for easier maintenance and weight balance adjustments.

The rear section of the chassis was shortened to allow mounting the suspension holder directly to the gearbox independent of the chassis plate.

The chassis features bent sides for proper weight balance and increased traction with maximum stability of the car. The rear part of the chassis is narrow.

After extensive testing of 25 different chassis designs, the final concept was selected for its flex characteristics and layout to produce the best balance of traction and stability.

CNC-machined from high-quality 2.5mm Swiss 7075 T6 aluminum, the lightweight chassis retains the necessary strength and rigidity, and is black coated at XRAY’s own in-house fully robotic coating line.

The chassis is universal for both Dirt and Carpet edition.

Chassis.

To adjust weight balance, the optional 1.6mm carbon fiber electronics plate can be installed in the front or rear mounting locations to move the ESC and receiver. If additional weight is needed, a 30g stainless steel plate is also available.

Chassis.

To adjust the weight balance the optional electronics plate can be easily installed in front ward or rearward position. The electronics plate is available either in lightweight 1.6mm carbon fiber alternative or as an additional weight balance.

Suspension Holders.

Narrow suspension holders feature inner pivot location closer to the vehicle center allowing for longer suspension arms. The narrower design increases rear traction.

The aluminum suspension holders feature Integrated Suspension Settings (I.S.S.™) which allows for quick & easy suspension geometry set-up.

Machined from premium Swiss 7075 T6 aluminum and black coated.

The suspension holders are universal for both Dirt and Carpet edition.

Suspension Holders.

The updated rear suspension holder is now mounted directly to the gearbox, independent from the chassis, to increase traction on all surfaces.

The updated rear suspension holder is now mounted directly to the gearbox, independent from the chassis, to increase traction on all surfaces.

Narrow suspension holders feature inner pivot location closer to the vehicle center allowing for longer suspension arms. The narrower design increases rear traction.

The aluminum suspension holders feature Integrated Suspension Settings (I.S.S.™) which allows for quick & easy suspension geometry set-up.

Machined from premium Swiss 7075 T6 aluminum and black coated.

The suspension holders are universal for both Dirt and Carpet edition.

Shock Towers.

The denser shock mount positions allow for very precise set-up adjustments.

The front shock tower features a wing mount provision and the rear tower features three different wing mounting positions for added adjustment.

Front & rear shock towers are machined from premium-grade graphite that is lightweight & strong, with multiple shock and roll center adjustment positions.

The shock towers are universal for both Dirt and Carpet edition.

Shock Towers.

The new front shock tower features two extra outer shock positions for additional set-up options to adjust the car for any track conditions.

The new front shock tower features two extra outer shock positions for additional set-up options to adjust the car for any track conditions.

The denser shock mount positions allow for very precise set-up adjustments.

The front shock tower features a wing mount provision and the rear tower features three different wing mounting positions for added adjustment.

Front & rear shock towers are machined from premium-grade graphite that is lightweight & strong, with multiple shock and roll center adjustment positions.

The shock towers are universal for both Dirt and Carpet edition.

Gear Box.

Super-narrow, ultra-low CG gear box (LCG) features quick & easy diff access. The narrower design of the gear box reduces weight and moves all parts closer to the chassis centerline.

Longer gear box – for front motor position - keeps more weight over the front axle for improved steering and corner speed on high grip surfaces. Included in the Carpet edition.

Shorter gear box – for rear motor position - improves traction on low grip surfaces by moving the weight of the motor and top shaft closer to the rear axle. Included in the Dirt edition.

Gear Differential.

The gear differential has 35% larger internal oil volume than previous design to increase consistency of the diff action, yet at the same time it is significantly narrower to fit into the LCG gear box and to move the rotating weight closer to the centerline.

The super-smooth gear diff includes a composite case and cover with internal satellite gears that are precision-molded from special XRAY-developed graphite composite material, ensuring a long lifespan and super-smooth, efficient operation.

The gear differential is suggested for medium to high traction conditions as it increases on-power steering that is beneficial on all carpet tracks.

The gear differential is included in the Carpet edition.

Ball Differential.

The XB2 ball differential offers improved performance, durability, and easier maintenance. The externally adjustable ball differential is machined from HUDY Spring Steel™ and is additionally hardened for extra durability and a longer lifespan. A high-quality carbide thrust bearing and carbide balls are included for ultra-smooth operation. The outdrive adapters are designed for use with 2.5mm pin drive shafts.

The ball differential is suggested for all types of dirt tracks and for bumpy Astro tracks and is included in the Dirt edition only.

Active Differential.

The unique XRAY Active Differential is a high-performance, adjustable gear differential for XB2 ... vastly improving the buggy's speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction, making it faster and easier to drive.

The unique XRAY Active Differential is a high-performance, adjustable gear differential for XB2 ... vastly improving the buggy's speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction, making it faster and easier to drive

While the XRAY Active Differential is a performance option for serious racers who want to gain an edge on superior speed and handling, it is also of great benefit to drivers of all levels that want a more predictable and easy-to-drive car in all racing conditions.

Easy Diff Access.

Gear box features super easy access to the differential. Both gear boxes for Dirt and Carpet edition have the super easy diff access by removing only 6 screws.

Each gear box incorporates all the finest details and craftsmanship. All parts fit together perfectly, and the super-easy access to the rear differential will be appreciated by every racer. The durable gear box houses the differential with all the transmission components and serves as the mounting point for the rear roll center holder, motor plate, and rear shock tower.

Diff Height Adjustment.

The gear box features differential height adjustment. There are 6 height adjustment positions available using the included eccentric bushings. The ideal position will vary depending on the track conditions, ride height and the size of the tires used.

Slipper Clutch.

Power from the motor is transferred to the drivetrain via an externally adjustable slipper clutch for quick & easy tuning.

There are two different slipper clutch designs available:

2-pad slipper – increases slippage to generate smoother acceleration at low traction conditions, included in Dirt edition

3-pad slipper – less slippage to generate more consistent braking at high traction conditions, included in Carpet edition

The slipper pads are made from ultra-efficient SLS material with very-high slip efficiency, thus allowing very precise slip adjustment.

The lightweight slipper plates are machined from premium Swiss 7075 T6 and additionally hardened before a final black surface treatment. The plates have a machined relief which decreases the friction surface to assist with clutch slip adjustment. With this plate design, pressure is focused on the circumference of the clutch pads for increased efficiency.

Motor Plate & Spur Gear Protector.

The super lightweight motor mount is machined from Swiss 7075 T6 aluminum and is a universal design that fits both Carpet and Dirt Edition gear boxes.

The molded composite gear protector prevents contact between the spur gear and the body. Moulded from strong, lightweight material, the cover helps to protect the body shell and spur gear, and it allows the body to be mounted lower without interference.

The motor plate is universal for both Dirt and Carpet edition.

Roll Center Holder.

Roll center holder fits the LCG gear box and features multiple roll center positions. The roll center holder also serves as the rear anti-roll bar mount.

An optional rear aluminum roll center holder features roll center positions in between the stock positions for additional tuning choices.

The roll center holder is universal for both Dirt and Carpet edition.

Drive Shafts.

Dirt and Carpet edition feature different length driveshafts to match the arm length, outdrive width and hub position of each version.

Manufactured from world-renowned HUDY Spring Steel™ the drive shafts feature 2.5mm drive pins for maximum drivetrain efficiency. The drive shafts are some of the thinnest yet most durable drive shafts used in electric off-road cars. Treated with a proprietary hardening process, the drive shafts provide unbeatable lifespan and reliability.

Rear Uprights.

Rear uprights feature aluminum roll center mounts with updated roll center position.

The upper roll center is adjusted at the camber linkage via shims (up/down & in/out), while the lower roll center is adjustable via eccentric inserts for 9 different positions (up/down & in/out).

The multi-function uprights have the upper roll center position in the middle of the axis of the driveshaft joint to help generate more traction and increase stability.

There are three different uprights available: hard (included), graphite (optional), and aluminum (optional), each suitable for particular track conditions.

Chassis Brace.

The front lower chassis brace is part of the Multi-Flex™ system that influences flex and handling. There are two different chassis braces available – medium (optional) and hard (included), each suitable for particular track conditions.  The brace is mounted directly to the chassis to hold the entire front assembly and front suspension, including the front protection bumper.

An optional medium-hardness composite molded brace is suitable for low- and medium-traction tracks.

The included brace is moulded from hard-hardness composite and is suitable for high- and very-high-traction tracks.

Rear Suspension Arms.

The rear suspension arms have different design specifically for the Dirt and Carpet editions. The longer suspension arms have geometry for improved consistency and handling.

Dirt edition – Special design of the art allows to move arm more frontwards that moves the weight into the rear of the car. The rear upright position in the arm is moved forward with an extensive range of wheelbase adjustment.

Carpet edition – supper narrow arms used from XB4 allows to move the arms more frontwards that moves the weight into the rear of the car.

There are two different rear suspension arm hardness alternatives available:  hard (included) and graphite (optional), each suitable for particular track conditions.

Front Suspension Arms.

Front suspension arms have a universal design for both Dirt and Carpet editions. The suspension arms have geometry for improved handling and the repositioned lower shock mount locations lower the shocks and shock tower to decrease the CG.

The design of the arm allows for a greater range of adjustments. The opening for the C-hub is larger for greater wheelbase adjustments possibilities compared to previous versions.

The shock mounting location is wider to allow use of the eccentric shock pivot ball to move the shock absorber between two different positions creating different shock angles that affect traction and corner speed.

The arm also features a mounting position for the optional front anti-roll bar.

There are two different front suspension arm hardness alternatives available:  hard (included) and graphite (optional), each suitable for particular track conditions.

The front arms are universal for both Dirt and Carpet edition.

Fully Adaptive Steering System.

The XB2 steering system was redesigned for both high traction and low traction conditions. The Fully Adaptive Steering System has many new parts including the steering arms, steering plate, servo horns, steering linkage, and pivot balls. The same components are included in both Carpet & Dirt Editions but allow different build configurations to alter the geometry depending on the track’s conditions. Smart & easy.

Fully Adaptive Steering System.

The Fully Adaptive Steering System allows easy changes to the steering assembly that transform the geometry and alter the handling characteristics of the XB2. No extra parts are required as all parts are in the kit.

Configuration for low traction conditions:

  • Steering plate oriented frontwards
  • Linkage installed rearwards
  • Servo link mounted on steering plate

With this configuration the outside wheel turns less which provides less steering and makes the car easier to drive.

Configuration for high traction conditions:

  • Steering plate oriented rearwards
  • Linkage installed frontwards
  • Servo link mounted on left steering arm

With this configuration the outside wheel turns more which increases more steering and makes the car more aggressive.

Front Roll Center Holder.

The wider front roll center holder was updated with an additional outer position that is especially suited for high speed tracks where less front end dive is required.

The design of the roll center holder was also updated for mounting the optional front anti-roll bar directly on the holder.

The front roll center holder is universal for both Carpet and Dirt Editions.

Steering Blocks.

The Carpet Edition now features the new 3 slots steering block extensions better suited for high traction conditions. These extensions allow the wheels to turn more and provide more steering in corners. The overall travel was increased so the car has more steering in tight corners.

The Dirt Edition includes the 2 slots steering block extensions more suitable for lower traction conditions.

The composite blocks are molded from a special composite mixture for maximum strength.

There are three different steering blocks available – medium (option), hard (included) and graphite (option) – which are suitable for various track conditions

Anti-Roll Bars.

In specific track conditions when the front or rear of the car need more stabilization, an optional anti-roll bar (#322400 or #323400) can be easily installed. The anti-roll bar is mounted to the front/rear roll center holder and can be adjusted via the included linkages.

Anti-roll bar wires of different thicknesses are available for fine-tuning with the wire thickness laser-engraved on each bar for easy identification.

Shocks.

The front shock absorber bodies and shock shafts are longer by 2mm to maintain the correct down travel with the new tower. Combined with the new shock towers and suspension geometry, these changes increase steering and improve jump landing.

The big-bore shocks are membrane free, but still allow for easy, consistent building and rebound control using the bleed-screw shock cap design.

The aluminum body and lower cap are all machined from premium Swiss 7075 T6 aluminum.

The shock shafts are machined from special steel material, precision hand-ground for maximum smooth operation, and additionally hardened for an increased lifespan.

Shocks.

The XB2 shock absorbers feature eccentric lower mounting pivot ball that changes the angle of the shocks when mounted in the arm. The angle of the shocks affects the traction the car will create and the way the car jumps and lands. Reversing the orientation of the lower pivot ball with alter the angle of the shocks for another tuning adjustment.

The SLP (Super Low Profile) shock absorbers offer superior performance, especially for high-traction conditions where together with the SLP shock towers there is reduced chassis roll, thus allowing the use of more droop for better landings.

The shocks are membrane-free while still allowing for an easy and consistent build with rebound adjustment using a bleed-screw shock cap design.

Shock extension is limited using composite shims under the pistons. Maximum compression is limited using composite shims under the shock collar.

The shock absorbers are universal for both Dirt and Carpet edition.

Shock Springs.

The shorter shock springs expand the range of ride height adjustments. The wide range of optional shock springs are available for super fine adjustment.

The SLP shock springs are specifically designed to fit the SLP shock absorbers however all the previously available shock springs will fit as well, providing a large range of tuning choices.

The XB2 springs, like all other XRAY springs, are manually measured, selected, and matched into pairs to guarantee precisely equal length and damping characteristics.

Each spring is laser-engraved with stripes to clearly indicate its firmness.

Shock Pistons.

Shock pistons are made from Delrin® and are molded using ultra-high precision moulds. All-new 2-hole pistons (1.6mm and 1.7mm holes) are now included in the set.

Battery Holder.

Tweak-free fully adjustable battery holder is integrated into the side guards allowing easy and fast battery position adjustments, as well as simple battery installation through the smart quick-release system.

The battery pack can be easily moved front/rear to adjust the balance of the car. When the rear motor brace is removed, the battery pack can be moved completely rearward to maximize the rear weight bias and generate extra traction on the rear suspension.

The height of the battery backstop is also adjustable for different battery sizes.

The battery holder is mounted to the chassis through one connecting screw on each side brace to eliminate any negative effects on chassis flex. 

The battery holder is universal for both Dirt and Carpet edition.

Motor Mount Brace.

The redesigned motor mount brace ensures optimum flex via a pivot ball mount that ensures side flex for increased traction.

The design of the car also allows removal of the motor mount brace to increase flex and to move the battery pack further to the rear to position more weight over the rear axles for improved rear traction.

The motor mount brace is universal for both Dirt and Carpet edition.

Side Guards.

Side guards integrate with the bent chassis and incorporate the adjustable battery holder system.

The tough composite side guards use double-sided Velcro™ tape to mount the body to the chassis and to seal against dirt.

The side guards are universal for both Dirt and Carpet edition.

Side Guard Braces.

Graphite side guard braces with redesigned shape make the front of the car more stable and more predictable. With the multiple mounting positions there are three flex settings available.

Soft setting – more aggressive front of the car

Medium setting – setting in between

Stiff setting - more precise handling of the car

The side guard braces are universal for both Dirt and Carpet edition.

Multiple Servo Position.

To allow for more precise weight balance adjustment, the servo position is adjustable either more rearwards or frontwards; there are 3 positions to choose from.

When the servo is moved rearwards, there is more weight on the rear and less weight on the front. This results in less diving into a corner, while increasing rear traction. Recommended for low- and medium-traction conditions.

When the servo is moved more frontwards, there is more weight on the front and less weight at the rear. This increases the diving effect but reduces rear traction. Recommended for high- and very-high traction conditions.

Arm Mount.

The lower composite arm mount is an important part of the chassis where the lower arms mount, and the block has an integrated 26° kick-up angle. Optional aluminum and brass arm mounts are available for further weight balance adjustment.

Suspension.

Correct suspension geometry is one of the most important features of any RC model car, while at the same time being one of the most difficult & challenging features for a designer.

Suspension is always a mixture of:

● design and shape of individual suspension parts
● flex and hardness
● materials used
● mounting system
● geometry and position of mounting points of connecting parts

From the suspension arms, through the suspension blocks, to the light yet robust steering blocks, every suspension part has been carefully designed for the 2WD 1/10 off-road racing platform to provide responsive racing characteristics in all conditions.

Caster Blocks.

The caster blocks are very lightweight, yet their construction makes them very stiff & rigid. The caster can be adjusted with values 0°, 2.5° or 5° by using included caster bushings.

There are three different caster blocks available – medium (option), hard (included) and graphite (option) – which are suitable for various track conditions.

Drivetrain.

The XB2 is a conventional gear-driven 2WD off-road car featuring:

● Rear Ball Differential (Dirt Edition) or Gear Differential (Carpet Edition) with adjustable oil viscosity, featuring 53T gear and internal satellite gears

● 25T (Dirt Edition) or 38T (Carpet Edition) graphite composite idle gear

● 20T super-lightweight Swiss 7075 T6 hardcoated aluminum top shaft

● adjustable slipper clutch with 78T main spur gear

● rear CVD drive shafts

Spur Gear.

Precision-molded spur gears are made from XRAY's exclusive secret blend of composite material, allowing the gear to run true yet be robust enough to handle high-performance brushless motors. The spur gears are designed to have the lowest possible weight while staying strong and light. Each gear is stamped with the tooth number for easy identification.

The XB2 is equipped with an 81T spur gear which suits the majority of tracks. For additional tuning, optional 75T, 78T, and 84T spur gears are available.

High Traction Body.

The XB2C’21 and XB2D’21 each feature a new XRAY Gamma body specifically designed with super-smooth airflow and revised downforce characteristics fine-tuned for their intended conditions.

The carpet version of the all-new body, the Gamma 2C, is designed especially for high traction conditions and improves the stability in fast corners, chicanes and helps with rotation in tight corners.

The Gamma Carpet body is also available in lightweight version.

Low Traction Body.

The dirt version of the new XB2 body, the Gamma 2D, is designed for low traction conditions. The new profile improves the stability and increases downforce towards the rear of the vehicle to help generate more traction for the car.

The Gamma 2D body is also available in lightweight version.

Wings.

The Carpet and Dirt Editions of the XB2 each feature a different wing paired to work with their particular body. Made from strong Lexan™ material, the wing is supported on the wing mounts by extended flat shims to better support and extend the life of the wing.

Various wing designs in different thickness are available separately to alter downforce and handling. The thicker wing gives higher traction and stability but gives reduced steering.

Wheels.

The included wheels are IFMAR standardized with the new wheel hex offset. The wheels feature a redesigned countersunk center area to allow the wheel nut to sit deeper in the wheel.

The wheels are perfect for high-competition racing. They feature internal reinforcement ribs to provide stability and resist deformation, yet they are made from a flexible material to provide durability and withstand impacts.

The side of the wheel is aerodynamic for maximum performance. The wheels were designed to provide maximum traction.

The wheels feature a 12mm internal hex.

Turnbuckles.

For maximum reliability, all turnbuckles are manufactured from special HUDY Spring Steel™ material for turnbuckles which features a tougher core. These turnbuckles are used for front & rear upright linkages and steering system.

Wheelbase & Weight Balance Adjustment.

Outer suspension pins holding the front caster block and rear uprights feature wheelbase shims for quick & easy wheelbase and weight balance adjustment. Using included shims in rear and in front, both front and rear blocks can be moved forward or rearward to adjust weight balance depending on track condition.

By moving the arms to the front, the balance & weight of the car are transferred more to the rear; this is recommended for medium- and high-traction conditions. By moving the arms to the rear, the balance & weight of the car are transferred more to the front.

Chassis Balance.

Chassis design focuses on balanced weight distribution and weight transfer. The chassis features pre-drilled holes for additional weights for optimum car balancing. Centerline holes are pre-drilled for easy balancing with the HUDY Chassis Balancing Tool #107880.

Ball-bearings.

The XB2 features greased ball-bearings for front steering blocks & rear uprights to increase lifespan in dusty conditions. The remaining bearings are degreased and oiled with AeroShell® Fluid 12 for maximum smoothness and long life.

A full set of 22 high-speed ball-bearings are used throughout the drivetrain to ensure maximum efficiency.

XRAY Instruction Manual.

XRAY Instruction Manuals have become the industry standard, being simply the best manuals included with an RC model car. Whether you are a first-time builder or an experienced racer, all instructions are straight-forward and easy to understand. The full-color instruction manual contains large 3D illustrations that show all assembly details in the clearest possible way: XB2´21 Instruction Manual

Silicone Oils.

HUDY Exclusive Silicone Oils are manufactured in Europe and each batch is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-standard cSt rating, the new line of oils will be easy to identify, adjust, and feel.

When following any set-up sheets by XRAY or XRAY team drivers, you can be sure that the oils you will get for your car are exactly same as those used by the factory racing team, thus ensuring very exacting set-ups and handling.

HUDY Chem Series.

Graphite Grease.

The XB2 includes premium HUDY Graphite Grease which is a high-performance, advanced-technology semi-fluid lubricant which incorporates both extreme pressure additives and finely-dispersed graphite for load carrying. It is intended primarily for the lubrication of rotating parts and loaded gears. In addition to providing outstanding load carrying, it is formulated to have excellent adhesion and resistance to "fling-off" under extreme conditions. The grease reduces wear and increases parts life.
HUDY Graphite Grease #106210 .

 

Wheel Hubs.

The XB2 comes equipped with offset hexes to perfectly match the width of the car with the new suspension arms and hubs.

Ultra-lightweight 12mm wheel hex drive hubs are CNC-machined from Swiss 7075 T6 black-coated aluminum. These ultra-true hex hubs have a clamping design which ensures ultra-solid mounting of the wheel on the hub.

To adjust track-width, optional offset wheel hex drive hubs are available.

Adjustment Possibilities.

The extensive range of adjustment possibilities includes: caster, camber, toe, kick-up, anti-squat, ride height, downstops, track-width, lower roll center, upper roll center, roll center position, bump steer, wheelbase, Ackermann, adjustable shocks, adjustable rear diff, adjustable slipper clutch, and adjustable XRAY Multi-Flex™.

Set-up Book.

The XB2 is one of the most adjustable electric 2WD off-road cars in the world. Whether you are a hardcore racing enthusiast or a club-level sportsman, you can very easily adjust the XB2 to suit your racing style, track type, and track conditions.

To fully understand the set-up possibilities, we recommend the legendary HUDY Set-up Book, loaded with over 40 pages of high-quality pictures and easy-to-understand RC car set-up explanations. Whether you are a novice driver or an experienced racer, you can easily learn many set-up tips & tricks and improve your set-up skills, ultimately translating into improved racing performance with your XB2. The HUDY Set-up Book is available for download exclusively at www.hudy.net

XRAY VIP Customer Treatment.

Owning an XRAY model racing car is an experience on its own. Not only will you own the most premium luxury model racing car in the world, but you will also become a member of the prestigious family of XRAY owners with direct support and service from the XRAY factory. XRAY brings you the most up-to-date RC Web site on the Internet, with daily racing news and latest product developments. If you have any questions, problems or comments, you can ask the XRAY Support Team or any XRAY Factory Team Driver on the XRAY Support Forum. You can even upload your own set-up sheets or download from the thousands of different set-up sheets available from all around the world at the exclusive XRAY Virtual Set-up Sheet Database, the world’s largest set-up sheet database. And that is only the start of the VIP treatment you get by joining Team XRAY.

Go UP