At the World’s most competitive off-road race – the World Championship, it was XRAY’s Daniel Kobbevik who brought Junior World Champion title to the all-new XB2 platform. This has been already the second Junior World Champion title for Daniel and the XB2. Tested and successfully run in the highest competition races now you can enjoy the winning platform.
The XB2 is typically XRAY–premium, professional, high competition R/C car for the most demanding racers, developed with attention to the smallest details and backed by premium service & support…a luxury masterpiece.
Designed, developed, and fully manufactured in-house at the XRAY factory in Slovakia, Europe, using the most high-tech German and Swiss machines and premium European materials, crafted with XRAY's legendary attention to detail by our artistic production specialists. The XB2 is truly a masterpiece.
At one of the world’s most competitive off-road race – the ROAR National Championship, it was XRAY’s Ty Tessmann who brought the first ROAR National Champion title to the XB2 platform. Tested and successfully run in the highest competition races now you can enjoy the winning platform.
Both Dirt and Carpet edition of the XB2 are both designed specifically for the different track conditions and extensively tested in all the different tracks to ensure maximum performance right out of the box.
The XB2D was long time tested at slippery track at Hudy Arena and at various dusty European tracks till high traction tracks in USA.
The XB2C was extensively tested at the carpet track at Hudy Arena and during the whole EOS race series season at various tracks around the Europe. The Carpet edition was at the same time tested at various Astro tracks.
Designed in virtual reality using the world's most sophisticated CAD tools, and manufactured using the world's best machining and molding machinery, the XB2 achieves a level of premium perfection in all details that is second to none.
Successful development of the XB2 – like all other XRAY platforms – would not have been possible without the involvement of the entire racing team working the entire year to test new ideas, prototypes, and improvements. The racing team travels to all major races around the world to provide XRAY drivers with first-class support & service so they can be assured that they always get 1st class treatment as part of the XRAY team.
The new chassis features bent sides for improved weight balance and increased traction with maximum stability of the car. The rear part of the chassis is narrower.
After extensive testing of 25 different chassis designs, the final concept was selected for its flex characteristics and layout to produce the best balance of traction and stability.
CNC-machined from high-quality 2.5mm Swiss 7075 T6 aluminum, the lightweight chassis retains the necessary strength and rigidity, and is black coated at XRAY’s own in-house fully robotic coating line.
The new chassis is universal for both Dirt and Carpet edition.
All-new side guards integrate with the bent chassis and incorporate the new adjustable battery holder system.
The tough composite side guards use double-sided Velcro™ tape to seal the body perfectly to the chassis and seal against dirt.
The side guards are universal for both Dirt and Carpet edition.
All-new graphite side guard braces with redesigned shape make the front of the car more stable and more predictable. With the multiple mounting positions there are three flex settings available.
Soft setting – more aggressive front of the car
Medium setting – setting in between
Stiff setting - more precise handling of the car
The side guard braces are universal for both Dirt and Carpet edition.
All-new tweak-free fully adjustable battery holder is integrated into the side guards allowing easy and fast battery position adjustments, as well as simple battery installation through the smart quick-release system.
The battery pack can be easily moved front/rear to adjust the balance of the car. When the rear motor brace is removed, the battery pack can be moved completely rearward to maximize the rear weight bias and generate extra traction on the rear suspension.
The height of the battery backstop is also adjustable for different battery sizes.
The battery holder is mounted to the chassis through one connecting screw on each side brace to eliminate any negative effects on chassis flex.
The battery holder is universal for both Dirt and Carpet edition.
All-new super-narrow, ultra-low CG gear box (LCG) features quick & easy diff access. The new narrower design of the gear box reduces weight and moves all parts closer to the chassis centerline.
Longer gear box – for front motor position - keeps more weight over the front axle for improved steering and corner speed on high grip surfaces. Included in the Carpet edition.
Shorter gear box – for rear motor position - improves traction on low grip surfaces by moving the weight of the motor and top shaft closer to the rear axle. Included in the Dirt edition.
The gear box features a new differential height adjustment. There are 6 height adjustment positions available using the included eccentric bushings. The ideal position will vary depending on the track conditions, ride height and the size of the tires used.
The completely redesigned gear box features super easy access to the differential. Now both Gear boxes for Dirt and Carpet edition have the super easy diff access by removing only 6 screws.
The gear box incorporates all the finest details and craftsmanship. All parts fit together perfectly, and the super-easy access to the rear differential will be appreciated by every racer. The durable gear box houses the differential with all the transmission components, and serves as the mounting point for the rear roll center holder, motor plate, and rear shock tower.
All-new redesigned motor mount brace ensures optimum flex via a pivot ball mount that ensures side flex for increased traction.
The design of the car also allows removal of the motor mount brace to increase flex and to move the battery pack further to the rear to position more weight over the rear axles for improved rear traction.
The motor mount brace is universal for both Dirt and Carpet edition.
The updated ball differential was refined and redesigned for the new transmission dimensions. The narrower design accommodates the narrow gear box and all the details were improved to make the differential smoother to increase traction.
The redesigned XB2 ball differential offers improved performance, durability, and easier maintenance. The externally adjustable ball differential is machined from HUDY Spring Steel™ and is additionally hardened for extra durability and a longer lifespan. A high-quality carbide thrust bearing and carbide balls are included for ultra-smooth operation. Includes outdrive adapters designed for use with drive shafts with 2.5mm pin.
The ball differential is suggested for all types of dirt tracks and for bumpy Astro tracks and is included in the Dirt edition only.
The all-new gear differential was completely redesigned. The differential has greater internal volume for more oil to increase consistency of the diff action, yet at the same time it is significantly narrower to fit into the new LCG gear box and to move the rotating weight closer to the centerline.
The super-smooth gear diff includes a composite case and cover with internal satellite gears that are precision-molded from special XRAY-developed graphite composite material, ensuring a long lifespan and super-smooth, efficient operation.
The gear differential is suggested for medium to high traction conditions as it increases on-power steering that is beneficial on all carpet tracks.
The gear differential is included in the Carpet edition.
Power from the motor is transferred to the drivetrain via an externally adjustable slipper clutch for quick & easy tuning.
The all-new slipper clutch was redesigned to accommodate the new LCG gear boxes and refined for different track conditions. There are two different slipper clutch designs available:
2-pad slipper – increases slippage to generate smoother acceleration at low traction conditions, included in Dirt edition
3-pad slipper – less slippage to generate more consistent breaking at high traction conditions, included in Carpet edition
The slipper pads are made from ultra-efficient SLS material with very-high slip efficiency, thus allowing very precise slip adjustment.
The lightweight slipper plates are machined from premium Swiss 7075 T6 and additionally hardened before a final black surface treatment. The plates have a machined relief which decreases the friction surface to assist with clutch slip adjustment. With this plate design, pressure is focused on the circumference of the clutch pads for increased efficiency.
All-new motor mount plate is redesigned to fit the new LCG gear box design and accommodate the updated spur gear protector.
The super lightweight motor mount is machined from Swiss 7075 T6 aluminum and is a universal design that fits both Carpet and Dirt Edition gear boxes.
The molded composite gear protector prevents contact of the spur gear with the body. Moulded from strong, lightweight material, the cover helps to protect the body shell and spur gear, and allows the body to be mounted lower without interference.
The motor plate is universal for both Dirt and Carpet edition.
All-new roll center holder is redesigned to fit the new LCG gear box and features updated roll center positions. The roll center holder also serves as the rear anti-roll bar mount.
An optional rear aluminum roll center holder features roll center positions in between the stock positions for additional tuning choices.
The optional front aluminum roll center holder allows for mounting an anti-roll bar when needed for certain track conditions.
The roll center holder is universal for both Dirt and Carpet edition.
As a part of the Multi-Flex™ system, the front upper deck is used to adjust chassis flex. There are two different upper decks available – medium (optional) and hard (included). The harder material makes the car more predictable and forgiving on the track depending on the track conditions.
The front upper deck features access openings for easy anti-roll bar adjustment.
The upper deck is universal for both Dirt and Carpet edition.
To match the new geometry of the updated rear suspension, the driveshafts’ length is increased compared to previous years. Dirt and Carpet edition feature different length driveshafts to match the arm length, outdrive width and hub position of each version.
Manufactured from world-renowned HUDY Spring Steel™ the drive shafts feature 2.5mm drive pins for maximum drivetrain efficiency. The drive shafts are some of the thinnest yet most durable drive shafts used in electric off-road cars. Treated with a proprietary hardening process, the drive shafts provide unbeatable lifespan and reliability.
Rear uprights feature new aluminum roll center mounts with updated roll center position.
The upper roll center is adjusted at the camber linkage via shims (up/down & in/out), while the lower roll center is adjustable via eccentric inserts for 9 different positions (up/down & in/out).
The multi-function uprights have the upper roll center position in the middle of the axis of the driveshaft joint to help generate more traction and increase stability.
There are three different uprights available: hard (included), graphite (optional), and aluminum (optional), each suitable for particular track conditions.
Both front and rear shock towers are all-new on the XB2. The front shock tower has a lower design for increased stability and the rear shock tower features new shock positions and three different wing mounting positions. The new rear tower is compatible with both front and rear motor LCG gearboxes, reducing the number of parts needed to change between configurations.
CNC-machined shock towers are made from thick premium-grade graphite material for incredible strength and a long lifespan. Each tower features multiple shock positions.
The shock towers are universal for both Dirt and Carpet edition.
All-new narrower suspension holders were redesigned to move the inner pivot location closer to the vehicle center allowing for longer suspension arms and new suspension geometry. The narrower design increases rear traction.
The aluminum suspension holders feature Integrated Suspension Settings (I.S.S.™) which allows for quick & easy suspension geometry set-up.
Machined from premium Swiss 7075 T6 aluminum and black coated.
The suspension holders are universal for both Dirt and Carpet edition.
The rear suspension arms are all-new with a completely different design specifically for Dirt and Carpet edition. The longer suspension arms have an all-new geometry for improved consistency and handling.
Dirt edition – the rear upright position on the arm is moved maximum frontwards with an extensive range of wheelbase adjustment.
Carpet edition – supper narrow arms used from XB4 allows to move the arms maximum frontwards that moves the weight into the rear of the car.
There are two different rear suspension arm hardness alternatives available: hard (included) and graphite (optional), each suitable for particular track conditions.
All-new front suspension arms have a universal design for both Dirt and Carpet editions. The suspension arms have all-new geometry for improved handling and the repositioned lower shock mount locations lower the shocks and shock tower to decrease the CG.
The new design of the arm allows for a greater range of adjustments. The opening for the C-hub is larger for greater wheelbase adjustments possibilities compared to previous versions.
The shock mounting location is wider to allow use of the new eccentric shock pivot ball to move the shock absorber between two different positions creating different shock angles that affect traction and corner speed.
The arm also features a new mounting position for the optional front anti-roll bar.
There are two different front suspension arm hardness alternatives available: hard (included) and graphite (optional), each suitable for particular track conditions.
The front arms are universal for both Dirt and Carpet edition.
Shock absorbers feature all-new eccentric lower mounting pivot ball that changes the angle of the shocks when mounted in the arm. The angle of the shocks affects the traction the car will create and also the way the car jumps and lands. Depending on the combination of the track, traction, tires, type of the chassis, position of the arms and uprights/steering blocks the shock angle can be adjusted either more in vertical or in less vertical position.
The SLP (Super Low Profile) shock absorbers offer superior performance, especially for high-traction conditions where together with the SLP shock towers there is reduced chassis roll, thus allowing the use of more droop for better landings.
The shocks are membrane-free while still allowing for an easy and consistent build with rebound adjustment using a bleed-screw shock cap design.
Downstop is adjusted using composite shims under the pistons. Upstop travel is adjusted using composite shims under the shock collar.
The shock absorbers are universal for both Dirt and Carpet edition.
The all-new shorter shock springs allow greater ride height adjustment. A wide range of different optional shock springs are available for super fine adjustment.
The SLP shock springs are specifically designed to fit the SLP shock absorbers however all of the previously available shock springs will fit as well, providing a large range of tuning options.
The XB2 springs, like all other XRAY springs, are manually measured, selected, and matched into pairs to guarantee precisely equal length and damping characteristics.
Each spring is laser-engraved with stripes to clearly indicate its firmness.
The XRAY Instruction Manuals have become the industry standard, and are simply the best manuals you will ever get with an RC model car. Whether you are a first-time builder or an experienced racer, all the instructions are straight-forward and easy to understand. The full-color instruction manual contains large 3D illustrations for easy comprehension.
Download the new Instruction manual here: XB2´20 Instruction Manual
The XB2 platform works at the highest competition level in any track conditions, whether it be super-low-traction dusty tracks, medium-traction, or super-high-traction carpet or astro turf; there is an XB2 for you that will handle flawlessly in any of these conditions.
There are two different XB2 kits to choose from – Carpet Edition and Dirt Edition, both built on the same platform with full compatibility and with interchangeable parts.
The Carpet Edition is designed for medium to very-high traction conditions, while the Dirt Edition is designed for very-low to medium grip conditions.
The Uni-Platform™ allows either XB2 edition to be tuned or converted to suit any track conditions with only a few additional parts.
At the heart of XRAY's philosophy is a firm commitment to perfection when it comes to engineering, design, performance and support, all made possible by state-of-the-art in-house manufacturing. The XB2 is the epitome of perfection that is typical for XRAY.
Dipl. Eng. Juraj Hudy
XRAY Chief Designer
Since release of our very first XB2 we have continued with our team to work on the further improvements bringing every year a new and improved 2WD car. Tested and raced in all track conditions around the world we remain committed to our goal improving our products by continuous development and testing to ensure that you always get the best-performing XB2 straight out of the box.
XRAY XB2 Designer
Some information shown below may include details from previous kits,
and it may vary slightly from current kit specifications.
The front lower chassis brace is part of the Multi-Flex™ system that influences flex and handling. There are two different chassis braces available – medium (optional) and hard (included), each suitable for particular track conditions. The brace is mounted directly to the chassis to hold the entire front assembly and front suspension, including the front protection bumper.
An optional medium-hardness composite molded brace is suitable for low- and medium-traction tracks.
The included brace is moulded from hard-hardness composite and is suitable for high- and very-high-traction tracks.
To allow for more precise weight balance adjustment, the servo position is adjustable either more rearwards or frontwards; there are 3 positions to choose from.
When the servo is moved rearwards, there is more weight on the rear and less weight on the front. This results in less diving into a corner, while increasing rear traction. Recommended for low- and medium-traction conditions.
When the servo is moved more frontwards, there is more weight on the front and less weight at the rear. This increases the diving effect but reduces rear traction. Recommended for high- and very-high traction conditions.
The dual-arm steering system is very simple yet effective. The steering system is fully bearing-equipped with 8 high-speed ball-bearings for very precise steering. The Ackermann is easily adjusted by quickly & easily changing the steering link mounting positions on the steering plate.
Bump steer is easily adjusted for more aggression by inserting a shim between the steering block and steering linkage.
Ackermann is also easily adjusted by inserting a shim on the steering plate as well changing various graphite extension plates on the steering blocks.
The lower composite arm mount is an important part of the chassis where the lower arms mount, and the block has an integrated 26° kick-up angle. Optional aluminum and brass arm mounts are available for further weight balance adjustment.
Correct suspension geometry is one of the most important features of any RC model car, while at the same time being one of the most difficult & challenging features for a designer.
Suspension is always a mixture of:
● design and shape of individual suspension parts
● flex and hardness
● materials used
● mounting system
● geometry and position of mounting points of connecting parts
From the suspension arms, through the suspension blocks, to the light yet robust steering blocks, every suspension part has been carefully designed for the 2WD 1/10 off-road racing platform to provide responsive racing characteristics in all conditions.
The caster blocks are very lightweight, yet their construction makes them very stiff & rigid. The caster can be adjusted with values 0°, 2.5° or 5° by using included caster bushings.
There are three different caster blocks available – medium (option), hard (included) and graphite (option) – which are suitable for various track conditions.
The tiny yet tough steering blocks are comprised of composite steering blocks and graphite Ackermann extensions for variable Ackermann positions.
The composite blocks are molded from a special composite mixture for maximum strength.
There are three different steering blocks available – medium (option), hard (included) and graphite (option) – which are suitable for various track conditions.
The XB2 is a conventional gear-driven 2WD off-road car featuring:
● Rear Ball Differential (Dirt Edition) or Gear Differential (Carpet Edition) with adjustable oil viscosity, featuring 53T gear and internal satellite gears
● 25T (Dirt Edition) or 38T (Carpet Edition) graphite composite idle gear
● 20T super-lightweight Swiss 7075 T6 hardcoated aluminum top shaft
● adjustable slipper clutch with 78T main spur gear
● rear CVD drive shafts
Precision-molded spur gears are made from XRAY's exclusive secret blend of composite material, allowing the gear to run true yet be robust enough to handle high-performance brushless motors. The spur gears are designed to have the lowest possible weight while staying strong and light. Each gear is stamped with the tooth number for easy identification.
The XB2 is equipped with an 81T spur gear which suits the majority of tracks. For additional tuning, optional 75T, 78T, and 84T spur gears are available.
For maximum reliability, all turnbuckles are manufactured from special HUDY Spring Steel™ material for turnbuckles which features a tougher core. These turnbuckles are used for front & rear upright linkages and steering system.
Shock pistons are made from Delrin® and are molded using ultra-high precision moulds. All-new 2-hole pistons (1.6mm and 1.7mm holes) are now included in the set.
Outer suspension pins holding the front caster block and rear uprights feature wheelbase shims for quick & easy wheelbase and weight balance adjustment. Using included shims in rear and in front, both front and rear blocks can be moved forward or rearward to adjust weight balance depending on track condition.
By moving the arms to the front, the balance & weight of the car are transferred more to the rear; this is recommended for medium- and high-traction conditions. By moving the arms to the rear, the balance & weight of the car are transferred more to the front.
Chassis design focuses on balanced weight distribution and weight transfer. The chassis features pre-drilled holes for additional weights for optimum car balancing. Centerline holes are pre-drilled for easy balancing with the HUDY Chassis Balancing Tool #107880.
The XB2 features greased ball-bearings for front steering blocks & rear uprights to increase lifespan in dusty conditions. The remaining bearings are degreased and oiled with AeroShell® Fluid 12 for maximum smoothness and long life.
A full set of 22 high-speed ball-bearings are used throughout the drivetrain to ensure maximum efficiency.
HUDY Exclusive Silicone Oils are manufactured in Europe and each batch is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-standard cSt rating, the new line of oils will be easy to identify, adjust, and feel.
When following any set-up sheets by XRAY or XRAY team drivers, you can be sure that the oils you will get for your car are exactly same as those used by the factory racing team, thus ensuring very exacting set-ups and handling.
The XB2 includes premium HUDY Graphite Grease which is a high-performance, advanced-technology semi-fluid lubricant which incorporates both extreme pressure additives and finely-dispersed graphite for load carrying. It is intended primarily for the lubrication of rotating parts and loaded gears. In addition to providing outstanding load carrying, it is formulated to have excellent adhesion and resistance to "fling-off" under extreme conditions. The grease reduces wear and increases parts life.
HUDY Graphite Grease #106210 .
The XB2 comes equipped with offset hexes to perfectly match the width of the car with the new suspension arms and hubs.
Ultra-lightweight 12mm wheel hex drive hubs are CNC-machined from Swiss 7075 T6 black-coated aluminum. These ultra-true hex hubs have a clamping design which ensures ultra-solid mounting of the wheel on the hub.
To adjust track-width, optional offset wheel hex drive hubs are available.
The included XB2 wheels feature countersunk center area to allow the wheel nut to be positioned further into the wheel.
The wheels are perfect for high-competition racing. The wheels are made from a very flexible material, while still being ultra-durable to withstand impacts. The side of the wheel is aerodynamic for maximum performance. The wheels were designed to provide maximum traction.
Internal reinforcement ribs make the wheels as stable as possible and eliminate deformation. The wheels feature a 12mm internal hex.
Dirt edition features Alpha 2 body which was designed to increase downforce. This body generates 50% more grip than previous versions, which improves handling on low traction. The body is made from high-quality premium Lexan™ material.
Carpet edition features Beta 2 body which was designed to increase the steering.
This body increases stability and improves handling in jumps. The front part of the body has a high-downforce area,
the sides of the body have upper downforce areas to generate more mid-body downforce,
and the straight sidewalls improve stability.
The upper part of the body features smooth flow channel for stability.
Different XB2 bodies are available in different thicknesses
for fine tuning the performance of the car.
The extensive range of various front and rear wings are available for fine tuning. All wings are produced from premium Lexan material.
The extensive range of adjustment possibilities includes: caster, camber, toe, kick-up, anti-squat, ride height, downstops, track-width, lower roll center, upper roll center, roll center position, bump steer, wheelbase, Ackermann, adjustable shocks, adjustable rear diff, adjustable slipper clutch, and adjustable XRAY Multi-Flex™.
The XB2 is one of the most adjustable electric 2WD off-road cars in the world. Whether you are a hardcore racing enthusiast or a club-level sportsman, you can very easily adjust the XB2 to suit your racing style, track type, and track conditions.
To fully understand the set-up possibilities, we recommend the legendary HUDY Set-up Book, loaded with over 40 pages of high-quality pictures and easy-to-understand RC car set-up explanations. Whether you are a novice driver or an experienced racer, you can easily learn many set-up tips & tricks and improve your set-up skills, ultimately translating into improved racing performance with your XB2. The HUDY Set-up Book is available for download exclusively at www.hudy.net
Owning an XRAY model racing car is an experience on its own. Not only will you own the most premium luxury model racing car in the world, but you will also become a member of the prestigious family of XRAY owners with direct support and service from the XRAY factory. XRAY brings you the most up-to-date RC Web site on the Internet, with daily racing news and latest product developments. If you have any questions, problems or comments, you can ask the XRAY Support Team or any XRAY Factory Team Driver on the XRAY Support Forum. You can even upload your own set-up sheets or download from the thousands of different set-up sheets available from all around the world at the exclusive XRAY Virtual Set-up Sheet Database, the world’s largest set-up sheet database. And that is only the start of the VIP treatment you get by joining Team XRAY.